Trim and flashing batten roofing machine, 2 in 1 design, cold rolling mills, twin side, one driven motor
1. Twin side roll forming machine
Combined twin side building material machinery steel sheet roll forming machine can handle the entire machine frame or parts,making the rusty surface clean and smooth The surface of the product increases adhesion. Combined double layer building material machinery steel tile roofing sheet roll forming machine .
Combined twin side building material machinery steel sheet roll forming machine make the backboard of stud and track machine, also make the holes on backboard. This milling machine can milling the backboard more level, hole place is more precious. This can make the roller more level after installing,and then the purlin will be more straigh
2. Technical details of double layer roll forming machine
| Model | BATTEN |
| Production speed | Max 25m/min |
| Pressed shaft diameter | Φ65mm |
| Profile wheel | 45# steel hard chrome plating |
| Equipment chassis | PIPE |
| Number of forming rows | 14/14 |
| Platen thickness | 0.42-0.6mm |
| Hydraulic shearing machine power | 5.5kw |
| Voltage | 380V/220V |
| Dimension | 5500*1400*1500mm |
| Weight | 6500kgs |
3. Main components of twin side roll forming machine
MACHINE COMPONENTS FOR METAL ROOFING SHEETS PANEL ROLL FORMING MACHINE |
| Name | Model/name | Quantity | Technical description |
| | Hydraulic decoiler or Manual | | Capacity: Max. 3Ton,hydraulic control steel coil inner bore expanding, shrinkage and stop. |
| | Material Guiding System | 1 set | For feeding in a right position no Deviation. |
| Precutting Device | 1 set | Pre-cutting or hydraulic cut |
| Main Roll Forming Machine | 1 set | About 12/12 steps base on the design |
| 3.Cutting system | Hydraulic Cutting | | Precutting and postcutting both. |
| 4.Hydraulic system | Hydraulic Station | 1 set | Providing the power of cutting. |
| | | | PLC control system, encoder positioning and cut-to-length automatically, touch screen operating. |
| 6.Racking system | Exit rack | 3 PC | no power. |
4. Production Flows
Uncoiling the sheet---Infeed guiding--Roll forming---Rectifying the straightness---Measure length---Cutting the panel--panels to the supporter (option: automatic stacker)
5. Advantages
The advantage of roof sheet making double layer roll forming machine
1.The system is easy to operate and use. PLC: Siemens (Can customize as customer require)
2.The surface of the final product is very beautiful without any scratch on the surface.
Product Tags:
|
|
Trim and flashing batten roofing machine, 2 in 1 design, cold rolling mills, twin side, one driven motor Images
|
